Selection Petrol Chainsaws for Forestry

MS 441 C-M

STIHL's most advanced pro chainsaw ever!

General

MS 441 C-M
More pictures

STIHL's most advanced pro chainsaw ever! The MS 441 C-M features STIHL M-Tronic, a fully electronic controlled ignition timing and fuel metering system. This modern, low vibration and high performance saw is simple to start and operate by automatically adjusting to the conditions you are working in. The M-Tronic system even remembers your settings from the last time you used the tool for quick and easy use. Optimised power to weight ratio. Very low vibration levels. Up to 20% less fuel consumption and 50% fewer emissions compared to conventional two-stroke engines without 2-MIX technology.

Versions

Price

** Price on request from your STIHL Approved Dealer

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Product variations

  • MS 441 High power, low vibration professional chainsaw.
  • MS 441 C-M STIHL's most advanced pro chainsaw ever!

Technical data

MS 441 C-M

Technical data

Displacement cm³ 70,7
Weight kg 1) 6,6
Power-to-weight ratio kg/kW 1,6
Rollomatic E, cutting length cm 40
Speed at maximum power Um 9.500
Tank volume l 0,72
Oil tank volume cm3 360

1) Without fuel, without bar and chain

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 441 C-M

Standard features

  • HD2 filter Zoom
    HD2 filter

    This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to its special material, the filter can easily be cleaned by washing, for example with STIHL Varioclean and warm water.

  • STIHL M-Tronic (M) Zoom
    STIHL M-Tronic (M)

    For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.

  • Advanced combustion technology Zoom
    Advanced combustion technology

    Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

  • Decompression valve Zoom
    Decompression valve

    The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Side-mounted chain tensioning Zoom
    Side-mounted chain tensioning

    Side-mounted chain tensioning makes it easy to tension the chain safely.

  • Controlled-delivery oil pump Zoom
    Controlled-delivery oil pump

    Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.