Submit Arrow Right
Selection Powerful Brushcutters and Clearing Saws

FS 460 C-EM K Clearing Saw

2 MIX Clearing saw with M-Tronic and short shaft

General

FS 460 C-EM K Clearing Saw

The FS 460 features the 'M-Tronic' fully electronic engine management system which adjusts ignition timing and fuel metering in all operating modes. With ErgoStart and simplified starting, the low emission 2-MIX engine and a 4 point anti-vibration system, this top of the range clearing saw is the ideal choice for anyone with large areas of tough overgrown grass to maintain. The FS 460 C-EM K is the short shaft version, with an optimised 25° gear system and chisel tooth blade for use as a saw in forestry applications.

Versions



The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

FS 460 C-EM K

Technical data

Technical data Value
Capacity cm3 45,6
Performance kW 2,2
Mowing Head Circular Saw Blade,Kreissägeblatt 225-24, Meißelzahn
Weight kg 1) 8,4
Total length cm 2) 168
Tank volume l 0,75
Anti vibration system 4 Point AV System,4 Punkt AV-System

1) Without fuel, cutting tool and without protection
2) Without cutting tool

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

FS 460 C-EM K

Standard features

  • STIHL 4 Point Antivibration System Zoom
    STIHL 4 Point Antivibration System

    Steel springs as anti-vibration elements on STIHL brush cutters reduce the transmission of vibrations caused by the engine and rotating cutting tool. The handles are extremely low-vibration and the devices are easy to guide.

  • STIHL M-Tronic Zoom
    STIHL M-Tronic

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • STIHL ErgoStart Zoom
    STIHL ErgoStart

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Tool free handle adjustment Zoom
    Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Documents

Gebrauchsanleitungen