Versions
-
MS 500i, RS, Cutting length 63 cm
-
MS 500i, RS, Cutting length 71 cm
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
Technical data
Technical data |
Value |
Chain brake
|
QuickStop
|
Anti vibration system
|
Standard AV-System
|
Displacement
cm³
|
79,2
|
Performance
kW
|
5
|
Weight
kg
1)
|
6,2
|
Power-to-weight ratio
kg/kW
|
1,2
|
Sound pressure level
dB(A)
2)
|
106
|
Sound power level
dB(A)
2)
|
119
|
Tank volume
l
|
0,78
|
Chain pitch
|
3/8"
|
Oil tank volume
cm3
|
325
|
1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
Standard features
-
HD2 filter with radial seal
The new HD2 air filter, made from PET material and featuring a radial seal, prevents the intake of fine dust particles. The hermetic seal increases the service life of the engine and reduces wear.
-
Decompression valve
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
-
Tool free fuel caps
Special caps to open and close the tank cap quickly, easily and without tools.
-
STIHL anti-vibration system
Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.
-
STIHL Ematic with new oil pump system
The new oil pump system allows a higher volume of oil
to be delivered. This is especially useful in dusty conditions
or when using a long guide bar.
-
STIHL INJECTION
STIHL injection technology enables the MS 500i to achieve extremely high performance with extraordinarily low displacement and low weight. The saw uses innovative technology to achieve rapid acceleration from 0 to 100 km/h in an unbelievable 0.25 seconds. The powerful saw is ready to use right away. Sensors measure air pressure and internal and external temperature, and pass information on to the control unit. This can use the identified values to determine the optimum fuel quantity and ignition timing.
-
Very easy to start, whether starting from cold or
The starting process is perfect, with no need for a start position, and easy access to the purger.
-
Sensor-controlled fuel metering
In addition to the external temperature sensor, the MS 500i also has a pressure and internal temperature sensor in its engine. This measures the environmental pressure on start-up, and during operation it checks the engine temperature and pressure in the crankcase. The electrical voltage generator delivers the required speed information. The control unit processes these values, meaning that the system adapts to the conditions of use. The fuel is then dosed at the optimum level, quickly resulting in perfect running characteristics.
-
Optimised bumper spikes
The tooth length of the bumper spikes has been adjusted to account for the radial contours of trees. The saw bites into wood even better when cutting lengths and felling.
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.