R 34,005.00
All prices include 15% VAT.
Select item

Technical details

Displacement72.2 cm³
Power4.40 kW
CO2704 g/kWh
Device weight without refuelling6.5 kg 1)
Device weight without refuelling8.20 kg 2)

Features

RELIABLE WORK WITH THE BEST PERFORMANCE. With STIHL M-Tronic, you’ll have the best performance from your work tool from the outset. Fully electronic engine management regulates the ignition timing and fuel metering in all work situations, taking into account external conditions such as temperature, altitude and fuel quality.
STIHL M-TRONIC
EFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.
MANUAL DECOMPRESSION
EASY STARTING EVEN WHEN WEARING GLOVES. Start your chainsaw safely and easily with the large starter grip. It’s easy to use the grip even with bulky gloves on.
LARGE STARTER GRIP
REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.
COMPENSATOR
SAVES YOUR ENERGY. The optimised sprocket cover is narrower and flatter than the previous model. This improvement enables effortless delimbing and excellent chip removal. It has integrated slide rails and a guide edge, making it easier to guide the power tool along the trunk.
OPTIMISED SPROCKET COVER
HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.
STIHL 2-MIX ENGINE
EXTENDED FILTER SERVICE LIFE. Pre-separation routing removes coarse, larger particles from the airstream before they can reach the actual filter. The HD2 filter keeps even fine dust away from the engine, ensuring a long engine service life, long cleaning intervals and easy maintenance of your chainsaw. When we refer to a long-life air filter system in chainsaws, this exclusively describes models that have pre-separation routing and an HD2 filter. With this system, you benefit from a significantly longer filter service life compared to conventional air filter systems.
LONG-LIFE AIR FILTER SYSTEM FOR CHAINSAWS
FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.
SIDE-MOUNTED CHAIN TENSIONING
QUICK AND EASY TO USE. With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure.
TOOL-FREE FUEL CAP FOR OIL AND FUEL TANKS
REDUCES OIL CONSUMPTION. The STIHL Ematic system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a controlled-delivery oil pump. It ensures that the chain oil gets to where it is needed for lubrication. This allows you to reduce oil consumption by up to 50%. If you often work in dusty conditions or if you use long guide bars, you can quickly and easily increase the oil quantity at any time with the new oil pump system.
STIHL EMATIC SYSTEM
ENABLES DEPTH-CONTROLLED CUTS. With the help of the cut-depth limiter with quick-release tensioner, the cutting depth can be adjusted up to approx. 20 cm on an infinitely variable basis. This can be done quickly and easily, even when wearing gloves.
CUT-DEPTH LIMITER WITH QUICK-RELEASE TENSIONER

Service & tips